Polyaspartic Garage Floor Coatings in Frisco, TX
A fast-curing, UV-stable garage floor system that can often be installed in a single day, so your garage is back in use sooner.
- Often installed in one day
- UV-stable, resists yellowing
- Built for hot tires and chemicals
Faster than epoxy, built for Texas sun
Polyaspartic is a type of polyurea coating that cures much faster than traditional epoxy and holds its color in sunlight. In a garage floor system, it’s used as the clear topcoat, or as both base and topcoat, over a ground and repaired slab with decorative flakes.
Why choose polyaspartic
The same great-looking flake floor, with less waiting and better resistance to sunlight.
Back in your garage sooner
Fast cure times mean many garages are finished in a single day.
Color that lasts
UV-stable topcoats resist the yellowing that sunlight can cause in some epoxies.
Hot tire and chemical resistant
A tough topcoat that stands up to hot tires, oil, fluids and road salt.
Hard, scratch-resistant finish
A dense, glossy surface that holds up to tools, bikes and daily traffic.
Easy to keep clean
Sealed and seamless, so spills wipe up and dirt sweeps away.
Flake and color options
Pair it with the flake blend or solid color that suits your garage.
How it compares
Both make a great garage floor. The difference is mostly speed, sun resistance and price.
Cure speed
UV stability
Install temperature range
Abrasion and scratch resistance
Typical cost
General comparison. Exact performance depends on the products used. Many systems combine an epoxy or polyurea base with a polyaspartic topcoat, and we’ll recommend the right system for your garage.
A one-day garage floor
Watch a typical one-day polyaspartic install, from bare concrete in the morning to a finished floor by evening. It plays on its own.
Step 1
…
…
- Prep and diamond grind
- Repair cracks and pits
- Base coat
- Broadcast the flakes
- Scrape and vacuum
- Polyaspartic topcoat
- Cure and walkthrough
Typical timeline for a standard two-car garage. Your exact schedule and cure times are confirmed at the free estimate.
It isn’t better for every job, but it cures much faster and resists yellowing in sunlight. Traditional epoxy costs less. We’ll recommend the right system for your garage and budget.
Light foot traffic is often possible the same day, and many garages are ready for vehicles within about a day. We confirm exact cure times for your floor and the weather.
Usually, yes. The materials cost more, but the faster install and UV stability are worth it for many homeowners. Your free estimate will compare options.
Polyaspartic topcoats are UV-stable, so they hold their color well even when the garage door is open to the sun.
Usually the old coating needs to be ground off so the new system bonds properly. We’ll check your floor at the estimate.
Want your garage floor done in a day?
Get a free polyaspartic estimate. We’ll check your slab, compare polyaspartic and epoxy for your garage, and bring color samples.
Other floors we install